France · low-MOQ order planning
Low-MOQ Clothing Manufacturing for French Brands
Plan an apparel run around its product specification, quantities and approvals. Fenalt manages apparel manufacturing and sourcing through factories, suppliers, material sources and production partners selected for each project. Scope, production location and terms are confirmed for the actual brief and written quotation.
Quantity and specification
Plan the order around the product
Fenalt's standard minimum-order reference is 50 pieces per style. It is a planning reference, not a promise that every fabric, colour, finish or size combination can be made at that quantity. Ask the quotation to confirm how it applies to the specific style and materials.
For an initial review, provide a tech pack or product description, measurement chart and tolerances, references, known fabric details, artwork, branding, labels and packaging requirements. List quantities by style, colour and size, and identify which specifications are final and which remain open. This supports a project-specific feasibility review, quotation and schedule.
| Product group | Details for the brief |
|---|---|
| Knits and loungewear | Fabric weight, fit, rib, seams, finish and known fibre composition. |
| Woven apparel | Measurements, lining, pockets, closures, stitching and reinforcement. |
| Outerwear and functional garments | Layers, lining, filling, closures and tests needed for any performance claim. |
| Denim and other bottoms | Composition, stretch, requested wash or colour, measurements and trims. |
Fabric development, colour matching, washes, prints, embroidery, labels and hardware should be included in the brief. Material and dye-lot minimums can differ from the garment minimum and depend on the source, construction, process and order specification; confirm them during sourcing.
Approvals and production criteria
Keep each approval tied to the order specification
- Technical review. Share the tech pack, references, quantities and intended use. Identify missing details that affect feasibility.
- Material and production planning. Confirm proposed materials, construction, partner, scope and assumptions in the quotation.
- Sampling and approval. Review fit, measurements, construction, colour, branding and finish. Keep the approved sample tied to the bulk specification revision.
- Bulk coordination. Record quantities, size breakdown, artwork, labels, packaging, tolerances and permitted substitutions before production.
- Inspection and dispatch. Agree on the inspection plan and commercial delivery terms, then confirm the dispatch and transport arrangements.
Fenalt's standard sample reference is 10–15 days for sample production, plus an estimated 3–5 days for sample shipping. The standard bulk production reference is 15–20 days from pre-production sample approval to export dispatch. These are production-stage references, not a guaranteed door-to-door delivery date. Confirm the schedule for the materials, approvals, production plan and transport route.
Fenalt's inspection reference is AQL 2.5 under ANSI/ASQ Z1.4 General Inspection Level II when included in the agreed inspection plan. AQL describes sampling; it does not mean every garment is inspected or promise a defect-free lot. Define the inspection stage, lot, sample, defect categories, acceptance criteria and action for non-conformity in writing. Additional tests or metal detection should be confirmed for the product and order.
France-specific preparation
Confirm import and label details for the actual garment
Before shipment, the importer and customs representative should confirm operator identification, product classification, documented origin, declaration data and required documents. French Customs says operators need an EORI number for customs formalities; the process depends on the operator's establishment and circumstances. Check the company's existing status with Customs before requesting a number.
Clothing tariff treatment depends on product classification and documented origin. Use the French Customs RITA tariff service to check current measures for the garment and origin. This page does not set a duty rate, tax amount, preferential treatment or landed cost. Any preference depends on the applicable origin rules and valid supporting evidence.
The French DGCCRF says clothing composition labels must be legible, fixed to the product, in French and state textile-fibre percentages. Confirm the finished garment's composition and review the label for the product and sales context before printing. Care information and origin statements have separate rules; they should not be assumed from the composition-label requirement alone.
French Customs: RITA tariff service
Regulation (EU) No 1007/2011 on textile fibre names and labelling
Fenalt's standard commercial references include DAP for small-batch courier shipments and FOB Chattogram for bulk sea freight, where applicable. Confirm origin, named place or port, responsibilities, charges and delivery terms in the quotation and order documents. No fixed transit time, universal DDP service or delivered price is implied.
Before you confirm
Questions to resolve in the quotation
Can several styles share one minimum?
Do not assume they can. Ask the quotation to state how the minimum applies to each style and its material, colour and size breakdown.
Does the bulk production reference include arrival in France?
No. The 15–20 day reference ends at export dispatch. Transport, customs clearance and final delivery are planned separately.
Does AQL 2.5 mean every garment is checked?
No. It is a sampling plan. Agree on the inspection scope and acceptance criteria for the order.
Share the available technical file, product references, quantities by style and size, known materials, target date and delivery destination. Fenalt can review the information before discussing a project-specific quotation and schedule. A review request does not confirm feasibility or create an offer.